Sonar Guides
In these guides, you will find step by step instructions for how Jonny Schultz would set up a Fish Finder to locate quality largemouth bass.
Here are Jonny’s objectives when choosing the settings for each unit:
1. Ability to differentiate the size and number of bass on Down Scan and 2D Sonar
2. Clear and crisp shadows on Side Scan Sonar
3. Easy alignment and detailed contour maps on Chart View
You will find explanations on how the priorities above are achieved, as well as refinements you can make on the water to improve the quality of your image.
In this guide, you will find step by step instructions for how Jonny Schultz would set up the Garmin GPSMAP 1022XSV with LVS34 Transducer to locate quality largemouth bass. Here are Jonny’s priorities for choosing the settings in this guide:
The ability to clearly identify bass around cover, structure, and baitfish
Easy and reliable bait tracking out to 70ft away from the boat
Ability to differentiate the size on bass and other fish
In this guide, you will find explanations on how the priorities above are achieved, as well as refinements you can make on the water to improve the quality of your image. These settings will only work if your fish finder is installed properly.
This settings guide is specifically for the Garmin GPSMAP 1022XSV with LVS34 Transducer unit. Other units cannot be set up with these settings.
Because this item is a digital guide, there are no refunds.
*Disclaimer:
The opinions expressed are in good faith and while every care has been taken in preparing these documents, the Fish the Moment Team makes no representations and gives no warranties of whatever nature in respect of these documents, including but not limited to the accuracy or completeness of any information, facts and/or opinions contained therein.
This product was not created by Garmin.
The information contained in this document is confidential, privileged and only for the information of the intended recipient and may not be used, published, or redistributed without the prior written consent of Fish the Moment Media Group, LLC.
In this guide, you will find step by step instructions for how Jonny Schultz would set up the Garmin 8610 GT56 to locate quality largemouth bass. Here are Jonny’s priorities for choosing the settings in this guide:
The ability to clearly identify bass around cover, structure, and baitfish
Easy and reliable bait tracking out to 70ft away from the boat
Ability to differentiate the size on bass and other fish
In this guide, you will find explanations on how the priorities above are achieved, as well as refinements you can make on the water to improve the quality of your image. These settings will only work if your fish finder is installed properly.
This settings guide is specifically for the Garmin Garmin 8610 GT56 unit. Other units cannot be set up with these settings.
Because this item is a digital guide, there are no refunds.
*Disclaimer:
The opinions expressed are in good faith and while every care has been taken in preparing these documents, the Fish the Moment Team makes no representations and gives no warranties of whatever nature in respect of these documents, including but not limited to the accuracy or completeness of any information, facts and/or opinions contained therein.
This product was not created by Garmin.
The information contained in this document is confidential, privileged and only for the information of the intended recipient and may not be used, published, or redistributed without the prior written consent of Fish the Moment Media Group, LLC.
In this guide, you will find step by step instructions for how Jonny Schultz would set up the Garmin GPSMAP 1022XSV with LVS32 Transducer to locate quality largemouth bass. Here are Jonny’s priorities for choosing the settings in this guide:
The ability to clearly identify bass around cover, structure, and baitfish
Easy and reliable bait tracking out to 70ft away from the boat
Ability to differentiate the size on bass and other fish
In this guide, you will find explanations on how the priorities above are achieved, as well as refinements you can make on the water to improve the quality of your image. These settings will only work if your fish finder is installed properly.
This settings guide is specifically for the Garmin GPSMAP 1022XSV with LVS32 Transducer unit. Other units cannot be set up with these settings.
Because this item is a digital guide, there are no refunds.
*Disclaimer:
The opinions expressed are in good faith and while every care has been taken in preparing these documents, the Fish the Moment Team makes no representations and gives no warranties of whatever nature in respect of these documents, including but not limited to the accuracy or completeness of any information, facts and/or opinions contained therein.
This product was not created by Garmin.
The information contained in this document is confidential, privileged and only for the information of the intended recipient and may not be used, published, or redistributed without the prior written consent of Fish the Moment Media Group, LLC.
In this guide, you will find step by step instructions for how Jonny Schultz would set up the Lowrance Hook Reveal Fish Finder to locate quality largemouth bass. Here are Jonny’s priorities for choosing the settings in this guide:
1. Ability to differentiate the size and number of bass on Downscan and 2D Sonar
2. Clear and crisp shadows on Side Scan Sonar
3. Easy alignment and detailed contour maps on Chart View
In this guide, you will find explanations on how the priorities above are achieved, as well as refinements you can make on the water to improve the quality of your image. These settings will only work if your fish finder is installed properly.
This settings guide is specifically for the Lowrance Hook Reveal unit. This guide will not work for other units.
Because this item is a digital guide, there are no refunds.
*Disclaimer:
The opinions expressed are in good faith and while every care has been taken in preparing these documents, the Fish the Moment Team makes no representations and gives no warranties of whatever nature in respect of these documents, including but not limited to the accuracy or completeness of any information, facts and/or opinions contained therein.
The information contained in this document is confidential, privileged and only for the information of the intended recipient and may not be used, published, or redistributed without the prior written consent of Fish the Moment Media Group, LLC.
In this guide, you will find step by step instructions for how Jonny Schultz would set up the Lowrance Elite FS Fish Finder to locate quality largemouth bass. Here are Jonny’s priorities for choosing the settings in this guide:
1. Ability to differentiate the size and number of bass on Down Scan and 2D Sonar
2. Clear and crisp shadows on Side Scan Sonar
3. Easy alignment and detailed contour maps on Chart View
In this guide, you will find explanations on how the priorities above are achieved, as well as refinements you can make on the water to improve the quality of your image. These settings will only work if your fish finder is installed properly.
This settings guide is specifically for the Lowrance Elite FS unit. Other units cannot be set up with these settings.
Because this item is a digital guide, there are no refunds.
*Disclaimer:
The opinions expressed are in good faith and while every care has been taken in preparing these documents, the Fish the Moment Team makes no representations and gives no warranties of whatever nature in respect of these documents, including but not limited to the accuracy or completeness of any information, facts and/or opinions contained therein.
The information contained in this document is confidential, privileged and only for the information of the intended recipient and may not be used, published, or redistributed without the prior written consent of Fish the Moment Media Group, LLC.
In this guide, you will find step by step instructions for how Jonny Schultz would set up the Lowrance HDS Carbon Fish Finder to locate quality largemouth bass. Here are Jonny’s priorities for choosing the settings in this guide:
1. Ability to differentiate the size and number of bass on Downscan and 2D Sonar
2. Clear and crisp shadows on Side Scan Sonar
3. Easy alignment and detailed contour maps on Chart View
In this guide, you will find explanations on how the priorities above are achieved, as well as refinements you can make on the water to improve the quality of your image. These settings will only work if your fish finder is installed properly.
This settings guide is specifically for the Lowrance HDS Carbon unit. They will not work for other units.
Because this item is a digital guide, there are no refunds.
*Disclaimer:
The opinions expressed are in good faith and while every care has been taken in preparing these documents, the Fish the Moment Team makes no representations and gives no warranties of whatever nature in respect of these documents, including but not limited to the accuracy or completeness of any information, facts and/or opinions contained therein.
The information contained in this document is confidential, privileged and only for the information of the intended recipient and may not be used, published, or redistributed without the prior written consent of Fish the Moment Media Group, LLC.
In this guide, you will find step by step instructions for how Jonny Schultz would set up the Lowrance Elite Ti2 Fish Finder to locate quality largemouth bass. Here are Jonny’s priorities for choosing the settings in this guide:
1. Ability to differentiate the size and number of bass on Downscan and 2D Sonar
2. Clear and crisp shadows on Side Scan Sonar
3. Easy alignment and detailed contour maps on Chart View
In this guide, you will find explanations on how the priorities above are achieved, as well as refinements you can make on the water to improve the quality of your image. These settings will only work if your fish finder is installed properly.
This settings guide is specifically for the Lowrance Elite Ti2 unit. Other units cannot be set up with these settings.
Because this item is a digital guide, there are no refunds.
*Disclaimer:
The opinions expressed are in good faith and while every care has been taken in preparing these documents, the Fish the Moment Team makes no representations and gives no warranties of whatever nature in respect of these documents, including but not limited to the accuracy or completeness of any information, facts and/or opinions contained therein.
The information contained in this document is confidential, privileged and only for the information of the intended recipient and may not be used, published, or redistributed without the prior written consent of Fish the Moment Media Group, LLC.
In this guide, you will find step by step instructions for how Jonny Schultz would set up the Humminbird Helix Gen 3 Fish Finder to locate quality largemouth bass. Here are Jonny’s priorities for choosing the settings in this guide:
1. Ability to differentiate the size and number of bass on Down Scan and 2D Sonar
2. Clear and crisp shadows on Side Scan Sonar
3. Easy alignment and detailed contour maps on Chart View
In this guide, you will find explanations on how the priorities above are achieved, as well as refinements you can make on the water to improve the quality of your image. These settings will only work if your fish finder is installed properly.
This settings guide is specifically for the Humminbird Helix Gen 3 Mega Imaging unit. This guide will not work for Gen 1, Gen 2, or Gen 4 units. We are in the process of creating guides for Gen 1, 2, and 4. Please check back for these setting guides.
Because this item is a digital guide, there are no refunds.
*Disclaimer:
The opinions expressed are in good faith and while every care has been taken in preparing these documents, the Fish the Moment Team makes no representations and gives no warranties of whatever nature in respect of these documents, including but not limited to the accuracy or completeness of any information, facts and/or opinions contained therein.
The information contained in this document is confidential, privileged and only for the information of the intended recipient and may not be used, published, or redistributed without the prior written consent of Fish the Moment Media Group, LLC.
In this guide, you will find step by step instructions for how Jonny Schultz would set up the Lowrance HDS Live Fish Finder to locate quality largemouth bass. Here are Jonny’s priorities for choosing the settings in this guide:
1. Ability to differentiate the size and number of bass on Down Scan and 2D Sonar
2. Clear and crisp shadows on Side Scan Sonar
3. Easy alignment and detailed contour maps on Chart View
In this guide, you will find explanations on how the priorities above are achieved, as well as refinements you can make on the water to improve the quality of your image. These settings will only work if your fish finder is installed properly.
This settings guide is specifically for the Lowrance HDS Live.
Because this item is a digital guide, there are no refunds.
*Disclaimer:
The opinions expressed are in good faith and while every care has been taken in preparing these documents, the Fish the Moment Team makes no representations and gives no warranties of whatever nature in respect of these documents, including but not limited to the accuracy or completeness of any information, facts and/or opinions contained therein.
The information contained in this document is confidential, privileged and only for the information of the intended recipient and may not be used, published, or redistributed without the prior written consent of Fish the Moment Media Group, LLC.
Sonar Interpretation Guide
The Sonar Interpretation Guide helps you identify the most common types of cover, structure, and fish species you will see on your fish finder. The guide contains multiple examples of each object or species in the Side, Down, and 2D sonar views. It’s a great reference while on the water to help understand what you’re seeing on your fish finder.
What this guide offers:
Visual examples of bottom cover, structure, fish species and baitfish
Examples of each object/species in Down, Side, and 2D sonar
Explanations of Down, Side, and 2D sonar
The Sonar Interpretation Guide helps you identify the most common types of cover, structure, and fish species you will see on your fish finder. The guide contains multiple examples of each object or species in the Side, Down, and 2D sonar views. It’s a great reference while on the water to help understand what you’re seeing on your fish finder.
What this guide offers:
Visual examples of bottom cover, structure, fish species and baitfish
Examples of each object/species in Down, Side, and 2D sonar
Explanations of Down, Side, and 2D sonar
Because this item is a digital guide, there are no refunds.
*Disclaimer:
The opinions expressed are in good faith and while every care has been taken in preparing these documents, the Fish the Moment Team makes no representations and gives no warranties of whatever nature in respect of these documents, including but not limited to the accuracy or completeness of any information, facts and/or opinions contained therein.
The information contained in this document is confidential, privileged and only for the information of the intended recipient and may not be used, published, or redistributed without the prior written consent of Fish the Moment Media Group, LLC.